Wire drawing production safety (copper medium pull, aluminum large pull)

1. Wire laying and aluminum rod joint

(1) During the time when the pay off pole is out of order, do not take the risk of starting the machine alone to manage the wiring, in order to prevent safety accidents.

(2) To prevent the aluminum pole from bouncing and hitting people when the speed is too fast.

(3) When lifting aluminum poles, pay attention to the smooth operation of the crane to prevent shaking and breaking the tie rod. The lifting personnel should keep a distance from the aluminum pole and should not insert their fingers into the aluminum pole when holding it.

(4) During the welding process of aluminum rods, protective goggles should be worn and people should be on the side of the welding machine to prevent being burned by welding sparks.

2. Rolling head threading mold

(1) When rolling the head, the direction of the rod material entering the wire should be opposite to the direction of rotation of the rolling wheel to prevent hands from being carried in due to misoperation.

(2) During the initial operation of clamping the wire with the clamping block in the head rolling machine, attention should be paid to preventing hands from being injured by the clamping block and the drum.

(3) When the aluminum large pull supporting rolling machine is working, people should maintain a safe distance from the cutting blade to prevent being cut.

(4) The rolling mill should be operated by a single person to prevent injury caused by improper cooperation among multiple operators.

(5) After completing the threading process, turn off the threading machine and do not turn it on unless in use.

(6) When threading the mold, be sure to coordinate the operation between the hand and the drum position to prevent the wire core from gripping the hand.

3. Collect both online and offline transactions

(1) When going up and down the reel, attention should be paid to collision and pressure prevention. When pushing the reel, attention should be paid to pedestrians to prevent injury.

(2) During production, if there is a wire breakage or a wire breakage during disc replacement, people should approach the winding disc from the side of the disc and cover their face with their hands to prevent injury from the wire head.

4. Copper tensile annealing

(1) Do not turn on steam until the softening chamber is fully closed. Before opening the softening chamber, turn off the steam first.

(2) After the steam is connected, the pipeline is at high temperature to prevent burns.

(3) After the steam is connected, there is hot water and steam injection at the inlet of the softening chamber line to prevent burns.

5. During product production, the body must not come into contact with the product in operation.

6. During production, prevent the overflow of drawing oil or drawing liquid, and clean up oil stains on the ground in a timely manner to prevent slipping and falling injuries.